Hydraulic Press for Plastic Products

The molding of thermoplastic materials for hydraulic presses of glass fiber reinforced plastic products is mainly the molding of composite materials such as SMC, GMT, LFTD, etc. The hydraulic press for plastic products is widely used in aviation, railway, automobile, shipbuilding, petrochemical, electrical, daily necessities and other industries.

Product Details

Introduction

The molding of thermoplastic materials for hydraulic presses of glass fiber reinforced plastic products is mainly the molding of composite materials such as SMC, GMT, LFTD, etc. The hydraulic press for plastic products is widely used in aviation, railway, automobile, shipbuilding, petrochemical, electrical, daily necessities and other industries.

Product Data

Description		Unit	100T	200T	315T	500T	630T	1000T	1500T	2000T
Nominal Force		KN	1000	2000	3150	5000	6300	10000	15000	20000
Pressure of fluid		Mpa	25	25	25	25	25	25	25	25
Slide Stroke		mm	600	800	800	1200	1200	1600	1600	2000
Opening Height		mm	900	1200	1200	1600	1600	2000	2000	2500
Ejecting Stroke		mm	150	170	180	180	180	200	220	250
Preload Pressure		KN	315	630	1000	1500	2000	3150	5000	6300
Opening Mould Force		mm/s	200	400	630	1000	1250	2000	3150	4000
Demould Force		mm/s	100	200	500	500	500	500	500	500
Down Speed		mm/s	200	200	200	200	200	300	300	300
Working speed		mm/s	1-6	1-6	1-6	1-6	1-6	0.5-5	0.5-5	0.5-5
Return Speed		mm/s	100	100	100	150	150	200	200	200
Preload Speed		mm/s	6-25	6-25	6-25	6-25	6-25	5-30	5-30	5-30
Opening Mould Speed		mm/s	2-25	2-25	2-25	2-25	2-25	2-25	2-25	2-25
Demould Speed		mm/s	5-30	5-30	5-30	5-30	5-30	5-30	5-30	5-30
Table Size	L.R.	mm	630	900	1200	1400	1600	3200	3200	3600
Table Size	F.B.	mm	630	900	1200	1400	1600	2200	2200	2500
Master Pump Power		KW	11	18.5	30	45	75	110	180	230
Weight		T	4.2	12	22.5	43.5	56	112	162	222

Product Components

1.Photoelectric protective device

2.Moving table

3.Floating guide-way and rolling bracket for die exchange

4.Blanking buffer device

5.Quick die clamping mechanism

6.Industrial touching screen monitor

7.Stroke, pressure, speed digital control device

8.Heating and cooling device in the hydraulic system, displacement of the heat transfer device

9.Blank holder slide, hydraulic cushion corners respectively regulating device(stretching asymmetric parts)

Product Advantages

The Y71 series hydraulic press for plastic products is equipped with two sets of in-mold core pulling control systems, and preset in-mold ejection control systems, which can add multi-point ejection and blowout functions. It can realize fast downward, pre-press, deflate, work, hold pressure, pressure relief, slow mold opening, fast return, slow demolding, fast ejection, ejection stay, fast return and other actions, and can also increase deflation Sectional (up to 6 sections), gas supply voltage stabilization, temperature multi-point control, rapid pressurization and other functions.

Certificates

Product Classification

At present, the company's glass fiber reinforced plastic products hydraulic presses are divided into three categories, the first category is mainly small and medium-sized products: the host is a general-purpose machine, equipped with domestic high-quality multi-stage hydraulic pumps and valves, and the speed is manually adjustable. The second type, the host is a general-purpose machine or a special machine, equipped with domestic high-quality hydraulic pumps and valves, and the speed is automatically adjusted. Because the first two types of hydraulic machines use domestic high-quality pumps and valves, they can avoid the drawbacks of expensive imported products, long delivery time, and inadequate service. They can also exclude users' high requirements for oil cleanliness, ambient temperature, and after-guarantee accessories Difficulties in purchasing are more suitable for SMEs.

Application