The Metal Sheet Forming Machine is suitable for stretching, bending, flanging, cold extrusion, blanking and other processes of metal materials, and properly corrects press-fitting, powder products, abrasive products, and plastic products and insulating materials. What are the advantages of hydraulic press precision manipulation?
1. Less heat and lower cost
The hydraulic oil consumed by the hydraulic press is usually only about 50% of that of the traditional hydraulic press.
2. High degree of automation, good flexibility and high precision
The pressure, speed and position of the hydraulic press are fully closed-loop digital control, with a high degree of automation and good precision. It also has programmable pressure and speed control to meet a variety of technological needs, and can also realize remote automatic control.
3. Energy saving
Compared with traditional hydraulic presses, driving hydraulic presses can save 30% to 70% of electricity.
4. Low noise
The noise of hydraulic press is usually less than 70dB, while the noise of traditional hydraulic press is 83dB~90dB.
5. High efficiency
The speed of the hydraulic press can be greatly increased, and the working cycle is several times higher than that of the traditional hydraulic press, which can reach 10/min~15/min.
6. Easy maintenance
The cleanliness requirement for hydraulic oil is far less than that of hydraulic proportional servo system, which reduces the influence of hydraulic oil pollution on the system.
