How to improve the speed function of Three-beam And Four-column Hydraulic Press

Regarding the hydraulic press machine equipment, today the editor will introduce it, but it is not just a discussion of the content, but a different method, after answering its related questions, so that we can understand more of its questions. And know how to respond instead of being overwhelmed. Moreover, the editor also hopes that through the following learning, we can learn more about hydraulic presses and equipment, and can increase our knowledge in this area. Question 1: What are the main functions of solenoid valves in hydraulic presses? Answer: The operating speed of a hydraulic press is also its operating speed, which is mainly determined by the operating flow. In other words, the power of the hydraulic pump is proportional to the product of the operating pressure and the flow. Therefore, when the hydraulic press returns, the equipment load is relatively small and the operating pressure is relatively low. Therefore, under the condition that the output power of the hydraulic pump can be ensured, the flow can be increased to increase the operating speed of the hydraulic press. However, the general rule is: high traffic, fast speed; small traffic, slow speed. Question 2: Why can't the operating speed of the hydraulic press be fast? Answer: The solenoid valve in the hydraulic press consists of a closed cavity in between, the center of the cavity is the valve, and the two sides are electromagnets. When the magnet coil is energized, the valve body will be attracted to block or leak different oil drain holes, and then complete the opening and closing of the holes, so that the direction of mechanical movement can be controlled.