1. Choose an installation location: The hydraulic press should be installed in a place with good air circulation, no dust, no moisture, no corrosive media, etc. At the same time, the transportation channel of the hydraulic press and the convenience of future maintenance and overhaul should also be considered.
2. Installation foundation: The hydraulic press must be installed on a stable and firm foundation. If the installation ground is not strong enough, reinforcement measures should be taken or other installation schemes should be selected. At the same time, the foundation table needs to be made according to the size and shape of the installation foundation.
3. Connect the pipeline: The pipeline connection requirements of the hydraulic press are strict, and suitable pipe fittings and sealing materials must be used to prevent leakage and corrosion. During the connection process, attention must be paid to the direction and angle of the pipe fittings to avoid affecting the normal operation of the hydraulic press.
4. Electrical wiring: The electrical wiring of the hydraulic press is also an important step in the installation. Before wiring, you should first check whether the voltage and frequency of the power supply match the electrical parameters of the hydraulic press. When wiring, professional tools and suitable cables should be used for connection.
5. Debugging and acceptance: After installing the hydraulic press, debugging and acceptance work are also required. Through debugging, check whether the performance of the hydraulic press is normal, and adjust and optimize it as needed. Before acceptance, a comprehensive inspection and test should be carried out to ensure that the hydraulic press can be used normally.
